1. Silicone Material Introduction

Almost every figure sold as silicone uses a two-part platinum-catalyzed system. Part A carries the base polymer and a platinum catalyst, Part B a crosslinker and an inhibitor. Mixed at 1:1 or 10:1, they cure into a crosslinked rubber with no byproduct and very little shrinkage.

How Platinum-Cured Silicone Is Made

Addition cure is fussy. Sulfur, tin, latex gloves and some modeling clays inhibit the catalyst and leave a patch that never sets, so clean molds and dedicated tools matter more than with TPE. The payoff is stability, shrinkage under 0.1 percent, and texture reproduced down to a pore.

Tin-cure silicone, common in cheap mold making, releases alcohol as it sets, shrinks more and yellows with age. Two products that both say silicone can behave a decade apart.

Shore Hardness: What the Numbers Mean

Softness is quoted on the Shore A scale, or Shore 00 for gel fills. Faces sit around Shore A 10 to 20 so features stay crisp; torsos and thighs run Shore A 0 to 8, denting under a thumb and recovering slowly.

Ask for the number layer by layer. A Shore A 15 head over a Shore A 5 body is a design decision, not an inconsistency.

Detail Retention and Surface Finish

Silicone holds fine texture because it cures without sagging and resists compression set. Pores, knuckle creases and the grain of a lip survive handling in a way softer TPE loses. Finishes are silicone-based pigment, sealed and dusted matte, and can be matched later, which acrylic on TPE cannot.

Stain, Tear and Heat Behavior

Silicone resists staining better than TPE, though not perfectly. Dark denim, black wigs and printed fabrics push dye into the surface within days, and the softest areas take it deepest. Tears cluster at underarms, the neck joint, behind the knees, and wherever the skeleton presses a thin wall. Cured silicone also handles heat far better than TPE: it will not slump in a warm room or a parked car, though a hot lamp held close will still mark it.

2. Customization Options

Customization is where material cost shows: silicone is cast in a rigid mold, so a shape change means a new mold and a finish change means another pass at the bench.

Head, Face and Hair

Most makers hold several head sculpts and let buyers choose skin tone, eye color and wig. Implanted hair is slower and costlier than a wig but photographs better up close. Painted brows and lashes are standard.

Body Build, Height and Proportion

Height drives weight, storage, clothing size and price. A 140 cm body often weighs 22 to 30 kg in silicone, while a 165 cm body passes 35 kg. When proportion matters more than height, a realistic sex doll build between 155 and 165 cm is the compromise.

Joints, Hands and Feet

Skeleton quality separates a display piece from a usable one. Standard builds run 16 to 18 joints; premium skeletons add articulated fingers, a rotating waist and locking knees. Standing feet need a reinforced sole and a heel channel.

Functional Upgrades

Heating elements, sound modules and internal cavities are optional. Heating is the upgrade buyers underrate: silicone conducts heat well and feels cool at room temperature. Confirm voltage and warranty cover first.

3. Buying Guide

Three numbers decide most purchases: height, weight and joint count. Price follows from them, and so does whether the figure fits the room.

How to Tell Silicone from TPE in a Listing

Listings blur the line on purpose. Six checks settle most cases:

• Weight per height. Silicone runs roughly 10 to 20 percent heavier at the same dimensions. A 165 cm body listed at 25 kg is almost certainly TPE.
• The word platinum. Addition-cure silicone is sold as platinum-cured; a listing that only says premium silicone is telling you less.
• A quoted shore hardness, published per region rather than as one number for the whole body.
• Price floor. Full silicone at full size rarely starts below $1,500; under $800, expect TPE or a hybrid.
• Repair kit. Silicone sellers offer silicone adhesive; TPE sellers offer a heat pen or oil.
• Seam placement. Fine seams at the back of the head suggest a silicone cast; heavy seams everywhere suggest a cheaper process.

Weight, Storage and Handling

A life size sex doll at 165 cm is near the practical limit for one person. Plan the route to its storage spot before the box arrives, keep a low bench at waist height, and never lift by the arms or head. A sex doll torso avoids the problem for smaller spaces.

What Budget Actually Buys

Lower prices usually mean TPE, hybrids or smaller silicone figures, and the cheap sex dolls end of the market is where silicone claims get loosest. Paying more buys a denser skin, a better skeleton and paint that survives handling.

4. Maintenance & Care

Silicone is low maintenance, not no maintenance. The routine below takes five minutes a week and prevents most of the damage that shortens a figure's working life.

Daily and Weekly Care

Wipe the surface with a damp microfiber cloth after use and dry the folds. Silicone does not absorb oil and does not need powdering, so skip the cornstarch unless a very soft area feels tacky. Keep dark clothing off the skin and the figure out of direct sun, which fades paint.

Monthly Deep Care

Once a month, wash with mild soap and lukewarm water, rinse, and pat dry. Check every seam under good light, especially the neck, underarms and behind the knees. Move the joints through their full range and check for dye transfer where clothing sits tightest.

Yearly Inspection and Repair

Once a year, plan a longer session: full clean, paint check, and a look at the skeleton through the softest panels. Small punctures and clean tears repair at home with addition-cure silicone adhesive, applied thin, cured 24 hours and dusted matte. Skeleton failures need professional repair.

Repair Options

Surface scuffs respond to cleaning before adhesive. Punctures take a drop of silicone adhesive, cured flat and dusted. Tears at a joint should be taped until repaired, because handling widens them.

5. Shipping & Privacy Policy

Orders leave the warehouse in a plain, unbranded carton. There is no product name, logo or illustration on the outer box, and the label carries only the delivery address and a neutral sender reference.

Billing follows the same principle: the descriptor on your statement is neutral and does not name the product category. Tracking is issued at dispatch, and a signature option is available at checkout.

Delivery is typically 7 to 20 business days, depending on destination, stock and clearance. We provide accurate customs documentation, but duty, inspection and release are decided by your authorities, not by us, and no retailer can promise an outcome. Check local rules first.

Each figure ships bagged inside the carton with the head and hands braced. Inspect the box before signing and photograph any crush damage while the courier is there.

6. Trust & Guarantee

Every figure is inspected before packing: seams, paint, joints and hardware. If something is wrong on arrival, report it within 48 hours with photographs and we will arrange a replacement part or a return, depending on the fault.

Warranty terms vary by model and are stated on the product page and in your order confirmation; consumables such as wigs and adhesives carry shorter cover. Claims here are limited to what we can document: the material, construction and terms of sale.

Support runs by email and covers material questions, sizing, care and repairs. When you compare the best sex dolls across retailers, ask each for the same four documents: material spec, weight, joint count and warranty term.

Frequently Asked Questions

Final Thoughts

A silicone figure is a material purchase before it is a visual one. The surface, the weight and the way the joints hold a pose all trace back to how the skin was cured and how thickly it was cast.

Start with a height and weight you can handle, confirm the material grade and joint count in writing, then decide on upgrades. Cared for properly, a platinum-cure figure will outlast two or three TPE bodies bought over the same period.